Being derivative... Thanks Hunter S.

Being derivative with a Quote from Hunter S. Thompson

"...Not that we needed all that for the trip, but once you get locked into a serious drug pinball collection, the tendency is to push it as far as you can.”

My lineup at Pincon Canada 2017

Pincon Canada was held June 3rd and 4th in Hawkesbury Ontario. The event was a success. Pretty good turnout for a first year. Here's a picture of my contribution to the show. My bingo Row.

It was fun talking with other pinball enthousiasts and showing people how to play bingo machines.

5 Must Have Tools For EM Pinball Repair

Here are 5 tools I consider a must have if you are serious about EM pinball repair

That is on top of the regular complement of tools you usually find in a toolkit.

1. Switch blade adjustment tool

The essential must have tool when adjusting switch blades. Accept no substitute. Also note there are different quality adjusters out there. I recommend the ones with narrow ends. The ones with flared ends don't work very well especially on short switch blades, and kkn "G" type relays.

2. Flexstone

Flexstones are used to clean switch balde points or contacts. They sand off the dirt, and oxidization on the points. They come in a variety of grit sizes, some more abrasive than others.

3. Chapman miniature Ratchet kit

Very useful all around. Quality bits, The ratchet is excellent in tight spots. Also the ratchet is just the right size for hex head post screws. The chapman tool sets are expensive, but they are well built and manufactured in the USA. Well worth the money.

4. Split blade screwdriver

A must have when working in EM Gottliebs or older games with flat blade screws. The Split blade and wedge system allows you to lock the screw on the tip of the screwdriver for easy threading.

Note that the screwdriver is next to useless for removing screws of tightening screws. It is solely an aid to start the screw. Saves you a lot of time and aggravation. Avoids the old dangling the screw at the end of the blade act.

5. Hemostats

The can lock tightly in closed position. Excellent as a third hand. Saves you from burning your fingers while soldering, their long and thin shape  allows them to go places where Needle nose pliers can't. Also very handy for inserting and removing springs in score reels, mixers and steppers.

Honourable mentions

Headlamp

Self explanatory. Strap to your head and light up wherever you look. Ideal for repairs on location.

Small precision file set
Although controversial (More controversial than Oolon Coluphid's trilogy of philosophical blockbusters). Sometimes it's necessary to file down a switch point when it's excessively pitted, conducts poorly. and it's not convenient to change the whole blade. Proceed with care, you can easily do more harm than good.

Dentist tools
Excellent for cleaning and scraping. Also, the hooked ones are very useful as a spring removal tool.

Telescopic magnet
Eventually, it has to happen, you drop a part in a tight spot. Here comes the telescopic magnet to the rescue. Also very useful as an aid for threading or removing screws in tight spots.

JIS screwdriver set
JIS screws are used in zaccaria pins. The head of the JIS screw looks almost exactly like a phillips screw, except for a small dot close to the +. Using a phillips screwdriver with a JIS screw results in stripping the head, frustration and swearing. Look like a pro when working on foreign games.

Always remember that for tools, you get what you pay for. Better tools allow you to work more efficiently. Less frustration, more enjoyment.

Bally Venice: Fun in the workshop and rambling

There's something about working on a bingo machine in the workshop. With the Backglass and playfield glass off. Test playing the game. My fondest memories of Golden Gate and Sea Island are in my workshop. Once the machine is all fixed up, I lose interest. Suddenly, it's not as fun to play the game. Maybe it's the challenge, the flashing lights, the sounds, the ozone. Who knows?

Test playing Bally Venice with no glass

Someone called me a pinball junkie not too long ago. It was no great revelation, I admit it freely. I'm hooked on repairing and collecting old Bally's. There's just something about them. Their electromechanical complexity, the build quality, the artwork, their idiosyncrasies. They just turn my crank.

Just look at all the Bingo guts, steppers, relays, motors, trip bank, mixer and control unit. So much stuff! Looks like a Borg cube inside out. Maybe other trekkies will see the similarity. Maybe not.

Bally Venice Bingo Inside

Venice repair progress update:

The electrifying control unit was caused by one of the lugs of the search wiper lock magnet coil touching the frame.

Coil lug touching the frame

The blue odds not stepping up like they should was a purely mechanical problem. I took the stepper unit apart, cleaned, re-lubed and the problem was solved.

The timer unit not stepping up was a combination of an oxidized jones connector, cleaning a few switches under the playfield and taking apart the timer stepper unit, clean and re-lubricated.

The test playing continues

Canada Pincon 2017

Canada Pincon 2017

I will be at the Canada Pincon 2017 (formally known at the Hawkesbury Flea Fair) June 3rd and 4th in Hawkesbury Ontario. I am bringing 2 Bingo machines (Bally Super Wall Street and Surf-Club) and a Bally Wizard! EM for the uninitiated. I will also host an informal Q&A session about bingo machines, how to play them and how they work. Hope to see you there.

Springtime moss

Bally Venice Bingo: The quintessential "chasing Bugs"

Venice Italy: The city that inspires thoughts about the renaissance, gondolas, canotier hats, the arts, romanticism and dubious water.

Bally Venice: A ultra rare bingo machine. A juggernaut of electromechanical complexity and four transistors. A machine that Bally didn't even bother to make a flyer for. My Bingo Grail.

Bally Venice Backglass Detail

This machine is the quintessential chasing bugs bingo machine. Madonna once wrote a song about how it feels to work on this bingo machine. It feels like the first time (fixing a bingo machine) all over again.

So far, Venice has 4 main bugs.

The special game didn't work properly...

The timer unit does not step up when the first ball is raised to the shooter lane, causing the shutter to remain open when the first ball reaches the top ball gate into play.

The blue odds don't step up as they should. Very weird as the blue odds step up coil is wired with the green odds step up coil. So if the green odds step up properly, the blue odds should too.

I get electrical shocks off the control unit frame. Probably a micarta insulator that has a conductive carbon spot.

___________________________

The special game bug is solved, the problem was two broken wires on the ODD / EVEN advance unit disk. Two wires on the edge of the disk looked odd, as if they were bent in an unusual way. Curious, I pulled on those two wires and discovered that the wires were actually broken, the cloth sheathing was the only thing holding the wires. I re-soldered the wires. Lo and Behold, the special game works. That was the most intriguing feature. Very fun.

The ODD / EVEN advance unit disk is the second stepper unit from the left.

2 cleanly broken wires

I suspect the other problems are of mechanical or physical nature. Electrically, everything looks OK. I don't have that much time to work on Venice as I have other repair commitments to fulfil first but I still dabble in Venice some late evening now and then.