Bally Capersville coindoor wire repair

The wiring on my Capersville looked a little ragged. It worked but it looked really bad.

The plan was to bring the game to the 2018 Canada Pincon pinball show.

I imagined the wiring would give out at the worst possible moment at the show.

A bit of refurbishing was in order.

Wiring Before:

Capersville coin door wiring before

Almost all the wires were broken. Most of them had the twist and tape routine.

The one wire that wasn't taped was barely holding by a strand.

I spliced and soldered the wires and finished them with some heat shrink tubing.

I even took the time to redo the wire dressing.  

Repaired wiring

I finished the job by adding some nylon spiral wire wrap for additional protection. That way, it's unlikely the wires will get pinched in the door hinge.

Finished Capersville coin door wire repair